Ti-48Al-2Nb-2Cr合金热变形行为及本构关系研究

采用Gleeble-1500热力模拟机对铸态Ti-48Al-2Nb-2Cr合金进行高温变形热压缩试验,变形温度范围为1050~1200℃,应变速率范围为0.001~0.1s^-1,压缩变形量为60%。研究该合金高温变形温度和应变速率与流变应力之间的关系,计算了合金激活能,并建立了Ti-48Al-2Nb-2Cr合金的Arrhenius本构模型和多元线性回归的本构模型。结果表明,该合金的激活能随温度升高和应变速率增大而增大;Arrhenius本构模型的相关系数为0.98228,平均相对误差为9.97%,相对误差在10%以内的点只占62.0%;而采用多元线性回归本构模型的相关系数为0.99566,平均相对误差为4.76%,相对误差在10%以内的点占92.6%,本构精度较高。     

2D/2D SnS2/MoS2 layered heterojunction for enhanced supercapacitor performance

Two-dimensional (2D) SnS₂/MoS₂ heterojunction with a 2D/2D novel structure was used as electrode material for enhanced supercapacitor performance. Compared with the sole SnS₂, the as-prepared 2D/2D SnS₂/MoS₂ layered heterojunction has exhibited great improvement in supercapacitor properties. This novel structure can effectively prevent agglomeration and stacking in electrochemical process, and 2D/2D structure is beneficial to intercalation and desorption of ions in electrochemical processes. The experiment result shows that MoSn₅ (samples with 5% MoSn5 mole ratios) display a specific capacitance of 466.6 F/g at the current density of 1 A/g in 0.5 mol/L potassium hydroxide solution, an impressive cycling stability with 88.2% capacitance retention at current density of 4 A/g. In addition, the as-fabricated symmetric supercapacitor exhibited high energy density of 115 Wh kg⁻¹ at the power density of 2230 Wh kg⁻¹. This work provides a fundamental investigation of 2D/2D layered material synergistic effect on the electrochemical process.     

地表移动带范围内建构筑物安全可靠性分析

地表建构筑物位于在生产矿山地表开采移动范围内，如果按照一般圈定地表移动范围原则判断建构筑物的安全可靠性，结果是不安全或者预留保安矿柱可保证安全。为分析地表移动带范围内建构筑物安全可靠性，采用FLAC3D软件建立数值模拟模型，对矿区地表移动进行分析研究，并结合建构筑物的破坏等级评判标准，可以更加合理地判断地表移动范围内建构筑物的安全可靠性，对存在相似条件的矿山具有一定的借鉴意义。     

The influence of carbon materials on the absorption performance of polymer-derived SiCN ceramics in X-band

Carbon-containing polymer-derived SiCN ceramics (PDCs-SiCN-C) were successfully fabricated with multi-layer graphene (MLG) and multiwalled carbon nanotubes (MWCNTs) as additives at 1100?°C. The effects of MLG and MWCNTs on the microwave absorption properties of PDCs-SiCN-C ceramics were analyzed. The imaginary permittivity and loss tangent of SiCN-MLG and SiCN-MWCNTs were about 3.4, 0.67 at 11.2?GHz and 3.1, 0.57 at 10.6?GHz, respectively. The minimum reflection loss of SiCN-MLG and SiCN-MWCNTs at 3?mm was ??54?dB and ??48?dB with the effective absorption bandwidth (RL ≤ ?10?dB, >90% absorption) about 1.5?GHz and 0.9?GHz in X-band.     

A preliminary study on the preparation of nanostructured Ti-doped Li4SiO4 pebbles by two-step sintering process

Li₄SiO₄ has been widely studied as attractive tritium breeding materials due to its innate merits. Considering the potential advantages of nanostructure in tritium breeding materials, a distinctive process was developed to obtain nanostructured Li₄SiO₄ pebbles. In brief, ultrafine precursor powders were synthesized by solvothermal method without using surfactants, and then indirect wet method was adopted to generate the green spheres with homogeneous microstructure. After that, the suitable sintering conditions were defined by studying the effects of sintering parameters on the grain size evolution, and nanostructured Ti-doped Li₄SiO₄ pebbles were first obtained by two-step sintering method. This study will be expected to provide references for fabricating other Li-based tritium breeding materials.     

Crystal Structures and Phase Behavior of Sulfadiazine and a Method for the Preparation of Aggregates with Good Performance

The solvate and the solvent‐free form of sulfadiazine (SD) were investigated. SD was found to exist in one solvent‐free form and the N‐methylpyrrolidone (NMP) solvate form. The NMP solvate was shown to be a channel‐type compound. The intrinsic properties of the solvents were used to evaluate the effects of solubility on the phase transformation of SD and the NMP solvate. The SD phase could transform to the NMP solvate by NMP‐mediated phase transformation, which was governed by crystallization of the NMP solvate. The crystalline NMP solvate could transform to the solvent‐free solid state through solid‐solid transformation upon heating or water penetration‐mediated phase transformation. The rate of this water penetration‐mediated phase transformation of the NMP solvate to SD was unusually fast. It can be used to obtain SD aggregates of well‐defined shape and good powder properties.     

Fabrication of dense nano-laminated tungsten carbide materials doped with Cr3C2/VC through two-step sintering

This work investigates the critical roles of two-step sintering (TSS) and laminated structure on the sintering behavior and mechanical properties of functionally graded WC-TiC-Al₂O₃ nanostructured composite materials doped with Cr₃C₂/VC. Results show that excellent mechanical properties are achieved for tailored TSS conditions with a hardness of 27.91?±?2.3?GPa and a flexural strength of 1423.3?±?23.5?MPa. The desirable mechanical properties are attributed to the suppressed grain growth without densification deterioration. TSS is more effective in facilitating the favorable dispersion of secondary phase toughening nano-particulates in a WC matrix than conventional sintering (CS). Cr₃C₂/VC dopant plays an important role in maximizing and shifting the temperature range of the kinetic window for WC-Al₂O₃ composites. Al₂O₃ crack deflection, transgranular Al₂O₃, microcracking, WC crack bridging and plate-like WC crack deflection are the major toughening mechanisms. Residual surface compressive stress induced by the graded structure is also an appreciated contribution to the improvement of mechanical properties.     

An approach to measure infill matric suction of irregular infilled rock joints under constant normal stiffness shearing

Rock joints infilled with sediments can strongly influence the strength of rock mass. As infilled joints often exist under unsaturated condition, this study investigated the influence of matric suction of infill on the overall joint shear strength. A novel technique that allows direct measurement of matric suction of infill using high capacity tensiometers (HCTs) during direct shear of infilled joints under constant normal stiffness (CNS) is described. The CNS apparatus was modified to accommodate the HCT and the procedure is explained in detail. Joint specimens were simulated by gypsum plaster using three-dimensional (3D) printed surface moulds, and filled with kaolin and sand mixture prepared at different water contents. Shear behaviours of both planar infilled joints and rough joints having joint roughness coefficients (JRCs) of 8–10 and 18–20 with the ratios of infill thickness to asperity height (t/a) equal to 0.5 were investigated. Matric suction shows predominantly unimodal behaviour during shearing of both planar and rough joints, which is closely associated with the variation of unloading rate and volumetric changes of the infill material. As expected, two-peak behaviour was observed for the rough joints and both peaks increased with the increase of infill matric suction. The results suggest that the contribution of matric suction of infill on the joint peak normalised shear stress is relatively independent of the joint roughness.